Samsung Galaxy Tab Pro 10.1 SM-T520 Firmware Download

Samsung T520 Firmwares:

Android 4.4.2:

- T520UEUANAE / XARANAE Cellular South

- T520XXUANAE / OXAANAE XEF France

- T520XXUANAE / EURANA1 Greece

- T520XXUANAE / OXEANA6 SER Russia

- T520XXUANAE / OJVANA4 EGY Egypt

- T520XXUANAE / OJVANA4 TUR Turkey

- T520XXUANAE / OJVANA4 XSG United Arab Emirates

- T520XXUANAE/ OXXANA3 SEB Baltic

- T520XXUANAE / UVSANAE CHO Chile

- T520XXUANAE / DBTANA2 Germany

- T520XXUANAE / OXXANA3 NEE Nordic

- T520XXUANAE / PHNANA2 Netherlands

- T520XXUANAE / ATOANA3 Austria

- T520XXUANAE / OXXANA3 BTU UK

- T520XXUANAE / UVSANAF TCE Mexico Telcel

- T520XXUANAE / XEOANA3 Poland

- T520XXUANAE / XSAANA4 Australia

- T520XXUANAE / OXXANA3 PHE Spain

- T520XXUANAF / OXXANA4 TPH Portuga

flasher:::Odin3 v3.09.3 - Download - 4shared

Turn off the device.

1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.

2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.

3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.



Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: PICASSOWIFI_EUR_OPEN.pit

- Firmware files selection:

Click BL button to select: BL_T520xxxxxxx_447712_REV00_user_low_ship.tar.md5
Click AP button to select: AP_T520xxxxxxx_447712_REV00_user_low_ship.tar.md5
Click CSC button to select: CSC_xxx_T520xxxxxxx_..._REV00_user_low_ship.tar.md 5

- Put the device into Download Mode,

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.