Samsung P900 Firmwares:
Android 4.4.2:
- P900XXUANAE / OJVANA5 XSG United Arab Emirates
- P900XXUANAE / OJVANA5 KSA Saudi Arabia
- P900XXUANAE / OJVANA5 TUR Turkey
- P900XXUANAE / OXXANA6 BTU UK
- P900XXUANAE / OXXANA6 XEF France
- P900XXUANAE / DBTANA4 Germany
- P900XXUANAE / OXAANAE PHN Netherlands
- P900XXUANAE / OXEANAC SER Russia
- P900XXUANAE / OXXANA6 TPH Portugal
- P900XXUANAF / OLBANA9 Southeast Asia
- P900XXUANAF / XSAANA2 Australia
- P900XXUANAF / NZCANA3 New Zealand
- P900XXUANAG / OLBANA9 Southeast Asia
- P900XXUANAG / OXXANA6 PHE Spain
- P900XXUANAI / OXXANA6 ROM Romania
- P900XXUANAI / XEOANA4 Poland
- P900XXUANAI / ATOANA4 Austria
- P900XXUANAI / EURANA1 Greece
- P900XXUANAI / OXXANA6 SEB Baltic
- P900XXUANB2 / OXXANB1 NEE Nordic
flasher::Odin3 v3.09.3 - Download - 4shared
Turn off the device.
Put the device into Download Mode
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
flasher::Odin3 v3.09.3 - Download - 4shared
Turn off the device.
Put the device into Download Mode
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: V1AWIFI_EUR_OPEN.pit
- Firmware files selection:
Click BL button to select: BL_P900xxxxxxx_509094_REV00_user_low_ship.tar.md5
Click AP button to select: AP_P900xxxxxxx_509094_REV00_user_low_ship.tar.md5
Click CSC button to select: CSC_Oxx_P900Oxxxxxx_509094_..._user_low_ship.tar.m d5
Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
Click BL button to select: BL_P900xxxxxxx_509094_REV00_user_low_ship.tar.md5
Click AP button to select: AP_P900xxxxxxx_509094_REV00_user_low_ship.tar.md5
Click CSC button to select: CSC_Oxx_P900Oxxxxxx_509094_..._user_low_ship.tar.m d5
Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect
your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files
into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS!
Word at Odin program.
- Disconnect the USB cable.
No comments:
Post a Comment