G350 Firmwares:
Android 4.2.2:
- G350XXUAMJ6 / OXAAMJ6 XEO Poland
- G350XXUAMKB / OXAAMKB XEF France
- G350XXUAMKC / OXXAMJ4 NEE Nordic
- G350XXUAML1 / OXAAML1 XEF France
- G350XXUAML2 / ITVAML1 Italy
- G350XXUAML2 / NRJAML1 France NRJ
- G350XXUANA1 / ITVANA1 Italy
- G350XXUANA1 / WINANA1 Italy WIND
- G350XXUANA1 / TMZANA1 Czech T-Mobile
- G350XXUANA1 / TIMANA1 Italy TIM
- G350XXUANB1 / OXAANB1 XEF France
flasher:::Odin307 - Download - 4shared
Put the device into Download Mode,
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
Turn off the device.
- Run Odin3.exe program.
flasher:::Odin307 - Download - 4shared
Put the device into Download Mode,
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
Turn off the device.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file
only), Auto Reboot, F.Reset Time.
- Click PIT button to select: cs02.pit
- Firmware files selection:
Click Bootloader button to select: BOOT_G350xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_G350xxxxxxx_2256728_REV02_user_low_ship.tar.m d5
Click PHONE button to select: MODEM_G350xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_xx_G350xxxxxxx_2337315_REV02_user_low_ship.tar .md5
-
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
Click Bootloader button to select: BOOT_G350xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_G350xxxxxxx_2256728_REV02_user_low_ship.tar.m d5
Click PHONE button to select: MODEM_G350xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_xx_G350xxxxxxx_2337315_REV02_user_low_ship.tar .md5
-
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and
installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect
your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files
into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS!
Word at Odin program.
- Disconnect the USB cable.
No comments:
Post a Comment