Firmwares:G386FXWUANB4 / NEEANB2 Nordic
- G386FXWUANB4 / ROMANB3 Romania
- G386FXXUANA8 / OXAANA8 DBT Germany
- G386FXXUANB4 / OXAANB4 DBT Germany
- G386FXXUANB5 / LUXANB3 Luxemburg
- G386FXXUANB5 / XEOANB1 Poland
Flasher: Odin3 v3.09.3 - Download - 4shared
Turn off the device, And take out its battery, SIM and memory cards.
Flasher: Odin3 v3.09.3 - Download - 4shared
Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: afyonlte.pit
- Firmware files selection:
Click Bootloader button to select: BOOTLOADER_G386Fxxxxxxx_..._user_low_ship.tar.md5
Click PDA button to select: CODE_G386Fxxxxxxx_..._REV000_user_low_ship.tar.md5
Click Phone button to select: MODEM_G386Fxxxxxxx_2478300_REV000_user_low_ship.ta r.md5
Click CSC button to select: CSC_OXA_G386FOxxxxxx_2478300_REV000_user_low_ship. tar.md5
- Put the device into Download Mode,
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS! Word at Odin program.
- Disconnect the USB cable.manualy on injoy it
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: afyonlte.pit
- Firmware files selection:
Click Bootloader button to select: BOOTLOADER_G386Fxxxxxxx_..._user_low_ship.tar.md5
Click PDA button to select: CODE_G386Fxxxxxxx_..._REV000_user_low_ship.tar.md5
Click Phone button to select: MODEM_G386Fxxxxxxx_2478300_REV000_user_low_ship.ta r.md5
Click CSC button to select: CSC_OXA_G386FOxxxxxx_2478300_REV000_user_low_ship. tar.md5
- Put the device into Download Mode,
1- Press and Hold Volume Down Key + Home Key then press Power key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
2- Press and Hold Volume Down Key then press Power button, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
3- Press and Hold Volume Down Key + Volume Up Key then press Power Key, And if you get the warning message release all keys and press Volume Up key to enter the Download Mode.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS! Word at Odin program.
- Disconnect the USB cable.manualy on injoy it
No comments:
Post a Comment