Samsung Galaxy S GT-S7582 Firmware Download,

S7582 Firmwares:

Android 4.2.2:

- S7582DDUANB4 / ODDANB3 India

- S7582XXUAMK3 / OXXAMK2 SEE South East Europe

- S7582XXUAMK3 / OXXAMK2 XEH Hungary

- S7582XXUAMK3 / OJVAMJ2 EGY Egypt

- S7582XXUAMK3 / OJVAMJ2 KSA Saudi Arabia

- S7582XXUAMK3 / OJVAMJ2 XSG United Arab Emirates

- S7582XXUAMK3 / ODDAMK1 India

- S7582XXUAMK3 / OLBAMK2 Southeast Asia

- S7582XXUAMK3 / ATOAML1 Austria

- S7582XXUAMK3 / OXXAML1 EUR Greece

- S7582XXUAMK3 / OXXAML1 ROM Romania

- S7582XXUAML5 / OLBAML3 Southeast Asia

- S7582XXUANA1 / ODDAMK1 India

- S7582XXUANA2 / OXAANA1 TPH Portugal

- S7582XXUANA2 / OXXANA1 DBT Germany

- S7582XXUANA2 / OXXANA1 SEB Baltic

- S7582XXUANA2 / OXXANA1 SEE South East Europe

- S7582XXUANA2 / OXXANA1 EUR Greece

- S7582XXUANA2 / OXXANA1 ROM Romania

- S7582XXUANA2 / ATOANA1 Austria

- S7582XXUANA3 / OLBANA1 Southeast Asia

- S7582XXUANA3 / OJVANB1 EGY Egypt

- S7582XXUANA3 / OJVANB1 KSA Saudi Arabia

- S7582XXUANA3 / OJVANB1 XSG United Arab Emirates


flasher:::Odin v3.09 - Download - 4shared



Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: kyleprods.pit

- Firmware files selection:

Click Bootloader button to select: BOOT_S7582xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_S7582xxxxxxx_2099582_REV00_user_low_ship.tar. md5
Click Phone button to select: MODEM_S7582xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7582xxxxxxx_2099582_REV00_user_low_ship.t ar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.