Samsung Galaxy Star Pro Duos GT-S7262 Firmware Download

S7262 Firmwares:

Android 4.1.2:
- S7262DXUAML3 / OLBAML3 Southeast Asia
- S7262JVUAMK4 / OJVAML1 Arabic

- S7262JVUAML1 / OJVAML1 EGY Egypt
- S7262XEUAML1 / OXEAMK1 SER Russia

- S7262XXUAML1 / ODDAMK2 India

- S7262XXUAML4 / ODDAML1 India
- S7262XEUANA1 / OXEANA1 SER Russia

flasher:::Odin307 - Download - 4shared

Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: logan2g.pit
- Firmware files selection:

Click Bootloader button to select: BOOTSPL_S7262xxxxxxx_..._REV00_user_low_ship.tar.m d5
Click PDA button to select: CODE_S7262xxxxxxxx_..._REV00_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7262xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7262Oxxxxxx_..._REV00_user_low_ship.tar.m d5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS! Word at Odin program.
- Disconnect the USB cable.